T 2112/16 17-04-2020

Reasons for the Decision

1. Request for oral proceedings - Article 116 EPC

1.1 Oral proceedings were appointed by the Board at the request of both the appellant and the respondent III. The Board interprets the statement in the appellant's letter of 5 March 2020 that they did not intend to attend the oral proceedings as being an implicit withdrawal of the request for oral proceedings, in accordance with the established case law of the Boards of Appeal. The appellant notably also chose not to file further arguments or amended requests in its reply to the Board's communication under Article 15(1) RPBA.

1.2 The request for oral proceedings of respondent III was conditional on the Board being minded to reach a decision other than the dismissal of the appeal.

1.3 Thus, since the Board is in a position to take a decision in respect of the appeal on the basis of the facts and submissions presently on file in compliance with the request of respondent III, the oral proceedings were duly cancelled.

2. Admissibility of the appeal

2.1 Respondent III requested that the appeal as a whole be considered inadmissible, arguing that the grounds of appeal did not contain any arguments as to why the decision was incorrect and was a mere repetition of the arguments made in the first instance.

2.2 As the Board already stated in points 1.1 and 1.2 of its preliminary opinion, the appeal contains reasoned arguments as to why the decision is incorrect and is not a mere repetition of those made in opposition proceedings. In its grounds of appeal the appellant contests the way the opposition division interpreted the terms "parallel", "encircling" and "dispersion chamber" in its decision and argues that this interpretation is relevant to establish which features are known from the prior art for novelty and inventive step. This does not constitute a mere repetition of the arguments and enables the Board to understand why the appellant considers the opposition division's decision to be incorrect and to follow the appellant's arguments without having to make investigations of its own.

2.3 The Board also finds that the arguments of the respondents regarding lack of substantiation and lack of justification for auxiliary requests 2 to 15 do not render the appeal as a whole inadmissible and concern specifically the admittance of these auxiliary requests.

2.4 The appeal as a whole is thus admissible.

3. Admittance of main request and auxiliary request 1

3.1 In its reply to the grounds of appeal, respondent III submitted that the main request and auxiliary request 1 should not be admitted into the proceedings for essentially the same reasons to those presented in support of its opinion that the appeal as a whole be inadmissible, i.e. that the grounds were a mere repetition of the arguments made in the first instance and contained no arguments as to why the decision regarding novelty and inventive step of claim 1 of the main request and of auxiliary request 1 was incorrect.

As already pointed out above in point 2.2 referring back to points 1.1 and 1.2 of the preliminary opinion, the Board finds that the grounds of appeal are substantiated and accordingly deal inter alia with the requests that were put forward during the opposition proceedings and which correspond to the present main request and auxiliary request 1.

3.2 Respondent III did not present any further arguments in this regard in reply to the preliminary opinion of the Board, so that the Board has no reason to deviate from its preliminary opinion and to exclude the main request or auxiliary request 1 from the proceedings under Article 12(4) RPBA 2007.

4. Main request - Article 54 EPC

4.1 In its communication pursuant to Article 15(1) RPBA the Board considered that D1 disclosed all the features of claim 1. The following reasoning was given (see also points 3.2 and 3.3 of the communication):

4.2 Contrary to the argument of the appellant, the inlet 20a in Figure 2 of D1 was in parallel with the gas purification device 50a, since the axes of the inlet 20a and of the device 50a were parallel.

4.3 A dispersion chamber encircled the exhaust inlet of the cylindrical body 50a in D1 and that the term "chamber" did not imply, as argued by the appellant, an additional physical structure. The space within the cylindrical body 50a before the catalyst 51 thus had a larger diameter than the pipe 20a and dispersed the gas such that it could be considered a dispersion chamber. The feature "dispersion chamber" was thus disclosed in D1.

4.4 This dispersion chamber appeared to encircle the exhaust inlet of the cylindrical body 50a in D1, since it also overlapped the whole diameter of the cylindrical body in the same way as the dispersion chamber of the patent. As could be seen from Figures 3 and 4 of the patent, the outer wall of the body 9c defining the dispersion chamber coincided to some extent with the outer surface of the cylindrical body 8 and enclosed it fully.

Since in D1 the dispersion chamber and the cylindrical body 50a also had coinciding outer surfaces, the Board found in its preliminary opinion that the skilled person would consider that the dispersion chamber also encircled the exhaust inlet in D1.

4.5 The Board therefore considered that the features "a dispersion chamber" and "[the dispersion chamber]for encircling an exhaust inlet end of said cylindrical body" also seemed to be disclosed in the embodiment of Figure 1.

4.6 Since no arguments were made by the appellant in reply to the preliminary opinion, the Board sees no reason to alter its preliminary finding in this regard, and thus confirms the same herewith.

4.7 Since D1 discloses all the features of claim 1, the subject-matter of claim 1 is not novel and does not fulfil the requirements of Article 54 EPC. The main request is thus not allowable.

5. Auxiliary request 1 - Article 123(2) EPC

5.1 Relative to claim 1 of the main request, claim 1 of auxiliary request 1 includes the following additional feature:

"wherein the pipe (9B), the dispersion chamber (9C) and the cylindrical body (8) form a 180° turn in flow direction of the engine exhaust (3), wherein the pipe (9B) and the cylindrical body (8) are arranged side by side".

5.2 The Board's provisional opinion (see points 4.1 to 4.4) was that the amendment to claim 1 extended its subject-matter beyond the content of the application as originally filed.

5.2.1 Contrary to the argument of the appellant, the Board stated namely that neither paragraph [0012] nor Figures 2 to 4 of the published patent application seemed to provide a basis for this amendment.

Figures 2 to 4 seemed to disclose further features disclosed in combination with those added to claim 1 and which could thus not be extricated from this combined disclosure due to the features' functional and structural link relating to influencing the flow properties. For example, the pipe and the cylindrical body were positioned next to each other in the radial direction and the pipe and the cylindrical body were flush with each other at both sides of the device or the pipe and the cylindrical body were positioned orthogonally to the dispersion chamber.

5.2.2 The appellant had argued further that no new technical effect would be caused by a "moderate" axial offset of the pipe 9B and cylindrical body such that such an offset could be allowable, but the Board did not find this argument convincing (see point 4.3). There seemed to be no direct and unambiguous disclosure of such an offset in the whole content of the application as originally filed.

5.2.3 Finally, the Board pointed out that paragraph [0012] seemed to describe the exhaust "flowing sideways" and "a perpendicular turnabout in the flow direction", not a 180 degrees turn.

5.3 Since no arguments were made refuting the Board's preliminary finding by the appellant, the Board sees no reason to alter it, and thus confirms the same herewith.

5.4 The subject-matter of claim 1 of auxiliary request 1 extends beyond the content of the application as originally filed and therefore does not fulfil the requirement of Article 123(2) EPC. Auxiliary request 1 is thus not allowable.

6. Auxiliary requests 1A and 4 - admittance

6.1 Auxiliary requests 1A and 4 were filed with letter of the appellant dated 28 August 2017 after it had filed its grounds of appeal and before the entry into force of the revised Rules of Procedure of the Boards of Appeal of the European Patent Office (hereinafter referred to as RPBA 2020) on 1 January 2020. The summons to oral proceedings were also notified to the parties before that date.

6.2 According to the transitional provisions stipulated in Article 25(1) RPBA 2020, the RPBA 2020 apply to any appeal pending on their date of entry into force (see e.g. T 634/16, Reasons 7 to 14). It follows that Article 13(1) RPBA 2020 applies to the present case.

6.3 The Board had already alerted the appellant in its preliminary opinion (see point 5.2) that the admittance of auxiliary requests 1A and 4 may have to be discussed with regard to the requirements of this provision.

6.4 Article 13(1) RPBA 2020 stipulates that any amendment to the case may be admitted only at the Board's discretion. This discretion shall be exercised "in view of, inter alia, the current state of the proceedings, the suitability of the amendment to resolve the issues which were admissibly raised by another party in the appeal proceedings or which were raised by the Board, ..., and, ..., whether the party has demonstrated that any such amendment, prima facie, overcomes the issues raised by another party in the appeal proceedings or by the Board and does not give rise to new objections". The party shall also "provide reasons for submitting the amendment at this stage of the appeal proceedings".

6.5 Regarding this last requirement of Article 13(1) RPBA 2020, it is noted that the appellant did not provide any reason in any of its written submissions, why auxiliary requests 1A and 4 were submitted at this stage of the oral proceedings. Moreover, however, the amendments undertaken in each of the requests under consideration at least do not overcome the raised objections.

6.6 Claim 1 of auxiliary request 1A reads as claim 1 of auxiliary request 1 with the following feature having been added to the claim:

- an exhaust inlet and an exhaust outlet of the dispersion chamber are coplanar.

6.6.1 The appellant argued that this feature had a basis in Figure 4. This argument is not found persuasive by the Board. As stated above under point 5.2.1 in respect of auxiliary request 1, Figures 2 to 4 disclose a plurality of features in combination. The added features of claim 1 could not be extricated from this combination due to a functional and structural link existing between all the features (all features relate to the flow properties), e.g. the pipe and the cylindrical body were positioned orthogonally to the dispersion chamber. The same still applies to the feature added to claim 1 of the present request.

6.6.2 Claim 1 of auxiliary request 1A therefore prima facie does not overcome the objections found to be valid with respect to claim 1 of auxiliary request 1. Its subject-matter thus fails to fulfill the requirement of Article 123(2) EPC.

6.7 Claim 1 of auxiliary request 4 reads as claim 1 of auxiliary request 1 with the following features having been added to the claim:

- the cylindrical body (8) encases a selective reduction catalyst, a casing (7) encases a filter for capture of particulates, the cylindrical body (8) and the casing (7) being arranged side by side, a communication passage (9) connects an exhaust exit end of the casing (7) to an exhaust inlet end of the cylindrical body (8),

- the pipe (9B) forms part of the communication passage(9).

6.7.1 The appellant argued that these additional features were based on paragraph [0024] of the application as published. However, regardless of its basis, the Board finds that these amendments do not relate to the claimed arrangement of the pipe, the dispersion chamber and the cylindrical body, which gave rise to the objection against claim 1 of auxiliary request 1. Thus they prima facie do not overcome the objection raised above for claim 1 of auxiliary request 1 either.

6.8 Since prima facie the requirement of Article 123(2) EPC is still not fulfilled and the appellant did not provide any reason why these requests were submitted at this late stage of the proceedings, the Board exercised its discretion under Article 13(1) RPBA 2020 not to admit auxiliary requests 1A and 4 into the proceedings.

7. Auxiliary requests 2, 3 and 5 to 14

7.1 Auxiliary requests 2, 3 and 5 to 14 were filed with the grounds of appeal. Although the numbering of these requests has not been altered, the sequence of the auxiliary requests has been changed during the course of the appeal proceedings at least due to the introduction of auxiliary request 1A, this involving a material change in focus of the claimed invention and thus resulting in an amendment of the case which the Board and the respondents had to deal with.

7.2 The Board had already alerted the appellant in its preliminary opinion (see point 5.1) that the filing of auxiliary request 1A had the effect of changing its complete case, particularly in respect of all lower ranking requests. Since the appellant has not presented any further arguments regarding this point, the Board sees no reason to change its opinion in this regard.

7.3 The selected sequence of the auxiliary requests leads to an evident broadening and lack of convergency in the requests. The feature "an exhaust inlet and an exhaust outlet of the dispersion chamber are coplanar", which is present in auxiliary request 1A, is not present in claim 1 of any of the lower ranking auxiliary requests 2, 3 and 5 to 14 filed with the grounds of appeal. This has the effect of the Board and parties having to consider subject-matter broader than that included in the higher ranking auxiliary request 1A. Such a change made after a party has presented its complete case does not meet the requirement for procedural economy as set out in Article 13(1) RPBA 2020.

7.4 Accordingly, the Board exercised its discretion under Article 13(1) RPBA 2020 not to admit the auxiliary requests 2, 3 and 5 to 14 into the proceedings.

8. In the absence of any request in the proceedings on the basis of which the patent can be maintained, the impugned decision cannot be set aside and the appeal must be dismissed.