T 0552/94 (Heat transfer printing/DAI NIPPON) 04-12-1998

Reasons for the Decision

1. The appeal is admissible.

2. Parties to the appeal

The Respondent 3's declaration to withdraw his opposition is to be understood as withdrawal from the appeal proceedings. Thus, he ceases to be a party to appeal proceedings as far as the substantive issues are concerned (see decision T 789/89, OJ EPO 1994, 482, points 2.3 and 2.6 of the reasons). The Respondent 2 neither filed any submission in appeal proceedings nor participated in any other way. The Board interprets his abstention as a wish not to be a party to appeal proceedings.

3. Scope of Appeal

Since the Proprietor of the patent is the sole Appellant, neither the Board nor any Respondent may challenge the maintenance of the patent in suit as amended in accordance with the interlocutory decision under appeal (see decision G 9/92, OJ EPO 1994, 875, point 14 of the reasons). Thus, the question whether or not the subject-matter claimed in the second auxiliary request, allowed by the Opposition Division in its interlocutory decision, is affected by the reasons set out below, is not a matter to be considered in this appeal, not for the reason that it would not apply to that request, but for the reason that the Board has no power to decide on the second auxiliary request.

4. Late-filed evidence (Article 114 EPC)

4.1. Documents (33) and (44) are new evidence submitted for the first time with Appellant's letters dated 12 September 1994 and 3 November 1998, respectively. Document (33) was published in 1989 and document (44) in 1991. The filing date of the patent in suit being 24 July 1984, both documents are postpublished and incapable of being relevant in the assessment of patentability. Thus, these late filed documents are not admitted into the proceedings (Article 114 (2) EPC).

4.2. Documents (34) to (36) and (39) to (43) are new evidence submitted for the first time in appeal proceedings with Appellant's letter dated 12 September 1994, with Respondent 1's letter dated 27 January 1995 and with Respondent 3's letter dated 29 Mai 1995, respectively. They address the matter whether or not the "reaction/catalyst/photo-hardened silicone oil" used in the patent in suit as amended was to be distinguished from silicone resins used in the state of the art. This matter, however, was not relevant to the assessment of novelty (cf. point 9 below). Therefore those documents lack relevance for the decision to be taken, and are not admitted into the proceedings (Article 114 (2) EPC).

4.3. The Appellant's comparative data is new evidence submitted for the first time on 3 November 1998 during appeal proceedings. This evidence is intended to support inventive step of the claimed invention. However, inventive step is not a matter considered in the present decision. Therefore, that evidence lacks relevance for the decision to be taken either, and is not admitted into the proceedings (Article 114 (2) EPC).

4.4. Documents (37) and (38) are new evidence cited for the first time in the Respondent 1's letter dated 27 January 1995 and has so far been relied upon in neither the opposition nor the appeal proceedings. The Appellant objected to their introduction into the appeal proceedings since they did not form part of the decision under appeal.

New evidence should only very exceptionally be admitted into the proceedings before the Boards of Appeal, if it is prima facie highly relevant in the sense that it is highly likely to prejudice the maintenance of the European patent in suit (see decisions T 1002/92, OJ EPO 1995, 605, point 3.4 of the reasons; T 39/93, OJ EPO 1997, 134, point 3.1.2 of the reasons). Since document (37) discloses a sheet comprising a support on which an image receiving layer was coated containing a hardened product of an amino-modified and an epoxy-modified silicone oil as does the claimed invention, that document is prima facie highly relevant with regard to novelty. The same conclusion applies to document (38).

Appellant's allegation that Respondent 1's objections based on those documents were not substantiated, is not supported by the facts. In Respondent's letter dated 27 January 1995, the objections were substantiated as to their substance and as to the dates to be effective for the patent in suit and for those documents.

Consequently, the Board decides to admit documents (37) and (38) into the appeal proceedings pursuant to Article 114(1) EPC.

Main Request

5. Admissibility

The amendments made to the claims as granted are designed to overcome objections raised by the Respondents-Opponents. The Appellant identified those objections in detail with reference to Respondent 1's letter dated 27 January 1995, and the Respondent 1 acknowledged during oral proceedings that the addressed objections were met. Therefore the amendments are considered appropriate and necessary and the Board, in exercising due discretion, admits the set of claims as amended according to the main request into the appeal proceedings (see decisions T 295/87, OJ EPO 1990, 470, point 3 of the reasons; T 406/86, OJ EPO 1989, 302, point 3.1 of the reasons).

6. Amendments (Article 123 EPC)

6.1. The Respondent 1 made no objection under Article 123(2) and (3) EPC against the claims as amended and the Board considers that these requirements are indeed satisfied.

6.2. In claim 1 the feature of carrying out the heat transfer printing "by means of a thermal head or laser beam" and of receiving the image on the image receiving layer "in accordance with image information generated from an electrical signal" is supported by page 1, lines 8 to 10 and page 5, line 15 of the application as originally filed. The incorporation of one or more resins in the image receiving layer, which are selected from the specific list indicated in claim 1, is backed up by original page 7, lines 15 to 22 and page 8, line 5 and 6. Page 8, lines 7 and 8 of the application as filed provides a basis for the releasing agents "solid waxes", "fluorine or phosphate-containing surfactants" and "silicone oils". The amounts of the releasing agents to be used find support on page 8, line 22, page 9, line 10 and page 9, line 33, respectively. The specification of the silicone oils to be "reaction-hardened, catalyst-hardened, or photo-hardened" is supported on original page 9, lines 23 and 24.

Therefore, all the amendments made to claim 1 as granted comply with the requirements of Article 123(2) EPC.

6.3. The amendments of the claims as granted bring about a restriction of the scope of the claims, and therefore of the protection conferred thereby, which is in keeping with the requirements of Article 123(3) EPC.

7. Insufficiency of the disclosure of the invention (Article 100(b) EPC)

Although not formally raised by the Respondents-Opponents as a ground in their oppositions, the Opposition Division objected to the patent in suit on this ground in the decision under appeal. However, the insufficiency of the disclosure of the invention was not at issue in this appeal, the Respondent 1 having explicitly accepted during oral proceedings the sufficiency of the disclosure of the invention due to the restrictions made to the claims. The Board is satisfied that the patent in suit as now amended discloses the invention in a manner sufficiently clear and complete to be carried out by a person skilled in the art. Since it was no longer in dispute before the Board, no detailed reasoning needs to be given.

8. Priority Right (Article 87(1) EPC)

8.1. The Respondent 1 submitted that document (37) disclosed a sheet as defined in claim 1 of the patent in suit as amended. That document is an intermediate document having a priority date between the priority date claimed by the patent in suit and the filing date thereof. Since the question arises whether document (37) is to be considered state of the art according to Article 54(3) EPC, the matter of whether or not claim 1 of the patent in suit as amended is entitled to claimed right of priority, has to be decided by the Board.

8.2. Pursuant to Article 87(1) EPC, a right of priority may only be enjoyed in respect of the same invention. Therefore, in deciding whether claim 1 of the patent in suit as amended is entitled to the claimed priority, it needs to be decided whether in the priority document the same invention is disclosed as in present claim 1.

8.2.1. The priority document aims at providing a heat transferable sheet showing a colour image with continuous gradation, having high density without fading and not adhering to the heat transfer layer of the heat transfer sheet (page 9, second half to page 10, first paragraph).

In order to achieve these objects, the priority document teaches on page 10, line 5 to page 11, line 9 and in its claim 1 to provide a sheet having an image- receiving layer comprising first and second regions having the following four essential features:

(a) a first region resin having a glass transition temperature of from -100 C to 20 C and polar groups,

(b) a second region resin having a glass transition temperature of at least 40 C,

(c) the first region occupies at least 15 % of the surface of the layer, and

(d) the first region forms mutually independent islands having a longitudinal length of 0.5 to 200 µm.

The priority document teaches explicitly on page 13, lines 7 to 13 and on page 13, line 26 to page 14, line 3 that these features are essential in the performance of the invention of the priority document, since the stated objects cannot be achieved when working outside of the frame set by these features. When the upper limit of the range of the glass temperature of the first region resin according to feature (a) is exceeded, a clear colour image cannot be obtained. When the glass temperature of the second region resin falls below the lower limit according to feature (b), the resulting colour image fades. On page 14, lines 6 to 11, the priority document puts additionally emphasis on the features (c) and (d). These findings are evidenced by comparative examples 1 and 2 on pages 29 to 31, which are outside of the frame of and do not belong to the invention as set out in the priority document. These examples prove indeed that without keeping in with the essential features (a) and (b), the objects aimed at cannot be achieved: the image is significantly distorted and fades, and the developed colour is inadequate.

Thus, at the priority date the objects of the invention set out in the priority document were achieved only, if each of the features (a) to (d) was satisfied.

8.2.2. However, since claim 1 omits the four features (a) to (d) taught in the priority document to be mandatory for performing that invention, these features are no longer a prerequisite for the invention as defined in the patent in suit. Thus, claim 1 turns away from the teaching of the priority document and from the nature and character of the invention defined therein. From the omission of the mandatory features it follows that the invention as defined by claim 1 of the patent in suit cannot be the same as that described in the priority document; hence the requirement of Article 87(1) EPC, that the priority right shall be enjoyed only "in respect of the same invention" is not fulfilled (see decisions T 134/94, point 3.2 of the reasons; T 1082/93, points 7.1.2 and 7.1.3 of the reasons, neither published in OJ EPO). Where priority is claimed but cannot be allowed because the essential condition precedent, that the inventions are the same, is not met, there is no right to priority (see decision G 3/93, OJ EPO 1995, 18, point 9 of the reasons).

8.2.3. The Appellant's counterargument that the priority document comprised a second, separate invention as shown by the comparative examples 1 and 2, on which a right of priority could be based, is at variance with the facts. The sole invention comprised in the priority document is explicitly defined on page 9, line 15 as to provide a sheet having a specific structure, i.e. having the features (a) to (d) as set out above, in order to achieve all the objects mentioned in the priority document (cf. point 8.2.1), including that addressed by the Appellant of preventing adhesion. The denotation of the two examples in the priority document as "comparative" examples proves the fact that these embodiments are in contrast to the invention set out in the priority document. Therefore, they cannot form a basis for any alleged second invention comprised within the priority document.

8.3. For these reasons, in the Board's judgement, independent claim 1 is not entitled to the claimed priority right. The effective date of that claim 1 is then the filing date of the European patent application.

9. Novelty (Article 54 EPC)

9.1. Document (37) discloses in example 1 on page 20, line 13 to page 21, line 16 a sheet for use in heat transfer printing by means of a thermal head, comprising a substrate and an image-receiving layer of resins having ester linkages, which is provided on the substrate. The image-receiving layer contains in an amount of 2.5% by weight of the resin the reaction-hardened product of an amino-modified silicone oil and an epoxy-modified silicone oil as releasing agent, which is the preferred embodiment according to dependent claim 2 of the patent in suit. Therefore, document (37) discloses subject-matter which is within the scope of claim 1 of the patent in suit. The Appellant has not contested this finding.

9.2. Nor has the Appellant contested that document (37) has a priority date earlier than the filing date of the patent in suit and that the former is entitled to that earlier priority date. Document (37), which is a European patent application, hence becomes state of the art in the sense of Article 54(3) EPC.

9.3. The patent in suit designates the same Contracting States as does document (37), i.e DE, FR, IT and NL, which fulfills the requirements of Article 54(4) EPC.

9.4. The Board concludes from the above, that document (37) destroys the novelty of claim 1 of the patent in suit as amended.

9.5. In view of lack of novelty with regard to document (37), there is no need for the Board to consider further document (38).

10. In these circumstances, the appeal relating to Appellant's main request must be dismissed for lack of novelty pursuant to Articles 52(1), and 54(3) and (4) EPC.

First Auxiliary Request

11. Admissibility

Amendments to the text of a patent as granted is considered admissible in opposition appeal proceedings only if they are necessary and appropriate and intended to meet an objection arising out of grounds of opposition and the issues raised thereby (see decisions T 295/87 loc cit.; T 406/86 loc cit.). That jurisprudence has been condensed in fresh Rule 57 (a) EPC. Whether or not the proposed amendments are admissible into the appeal proceedings is to be decided by the Board in exercising its discretion.

In the present case, the Appellant declared that the change in category from product claims according to the main request to use claims according to the first auxiliary request was designed to prevent any anticipation of the main request by document (24) or (28). The first auxiliary request should therefore be considered only in the event that those documents were found to destroy the novelty of the main request. Since, however, the documents (24) and (28) were not relevant in the assessment of novelty of the main request (see point 9 above), the amendment made to the claims, i.e. their change of category, is unnecessary and inappropriate, with the consequence that the Board does not admit the first auxiliary request into the appeal proceedings.