T 0406/91 (Detergent composition/ICI) 22-10-1992

Reasons for the Decision

1. The appeals are allowable.

2. There are no objections under Article 123 EPC to the present versions of the claims. Claim 1 of the main request represents a combination of Claim 1, which was found to be allowable under this Article in the Decision T 150/87 of 19 April 1988, and Claim 5 as filed and granted. Claims 2 to 8 of the main request correspond to granted Claims 2 to 4, 6, 7, 9 and 10 respectively.

The expression "being obtainable by bead milling" in Claim 1 of the auxiliary request is based on the example of the patent in suit.

3. With respect to the expression "mean diameter", the Board is convinced that, in the absence of any indication to the contrary, the skilled person would interpret this as referring to the number mean; i.e. the sum of the diameters of the particles divided by the number of particles. Although it is clear from documents (16) and (17) that mean diameter may be defined in several different ways, such as, for example, number mean, surface mean, volume or weight mean, and that the value obtained for the mean depends on the definition adopted, the number mean is the first one mentioned in the list on page 316 of document (16) if the six means of dubious value are ignored. Similarly, the number mean is the first one listed in Table 1 on page 107 of document (17) and the first one exemplified by calculation (cf. first complete paragraph above Table 1). Therefore, the Board is satisfied that, since it cannot be deduced from the description of the disputed patent which property of the particles (for example, size, volume, surface area) is of greatest significance for the stabilisation of the claimed compositions, the skilled person would consider that the dictionary meaning of mean or average is intended, i.e. the number mean (cf. The Oxford English Dictionary, Volume 1, page 583, where average is defined as to estimate, by dividing the aggregate of a series by the number of its units). Furthermore, in view of the size range under consideration it is clear that electron microscopy would be used to determine the particle size.

3.1. It is the established jurisprudence of this Board that a statement by an Opponent that an example of a patent has been repeated once "exactly as described" without obtaining exactly the described result as set out and claimed in the patent is clearly in principle quite inadequate to discharge the Opponent's burden of proof that, on the balance of probabilities, a skilled reader using his common general knowledge would be unable to carry out the invention (cf. T 189/89, OJ EPO 1991, 391 especially page 397).

In the present case, Appellant 02 claimed that a repetition of the example of the disputed patent had given a composition with a pour point of 12°C instead of 7°C as reported in the example (cf. Appendix 5 to the opponent's letter filed on 6 April 1989). However, Appellant 02 admitted that the example of the disputed patent had not been faithfully reproduced since surfactants which were only said to be the equivalents of those used in the example had been employed. Even in the light of this evidence, the Board is satisfied that the skilled person would be able to reduce the invention to practice without undue burden on the basis of the example and the information regarding suitable surfactants set out on page 2, line 47 to page 3, line 7 of the patent in suit, particularly that relating to the type of surfactants which fulfills both a surfactant function and reduces the pour point of the composition.

In the Board's judgment, therefore, the disclosure of the disputed patent is sufficient for the invention to be carried out by the skilled person.

4. The disputed patent relates to a liquid detergent composition having acceptable stability containing a dispersion of solids comprising at least one builder and at least one bleach in a substantially water-free non- ionic liquid surfactant.

Document (5), which the Board considers to represent the closest state of the art, discloses stable non-aqueous liquid detergent compositions containing the above- mentioned ingredients (cf. Claim 1 in combination with page 5, line 3, page 8, line 12 and Examples 2 to 4). However, a disadvantage of those prior art compositions was the necessity to use a dispersant to facilitate and to stabilise the dispersion. The dispersant, for example, finely divided silica, does not contribute to the detergency of the compositions and may be deposited on the washed laundry.

Therefore, in the light of the closest prior art, the technical problem underlying the patent in suit is to provide liquid-built detergent compositions without resorting to the use of dispersants to provide adequate stability (cf. disputed patent, page 2, lines 14 to 22).

According to the disputed patent this technical problem is essentially solved by ensuring that the mean diameter of the solids in the compositions is between 2.5µm and 10µm and that at least 90% of the solid particles have diameters less than 10µm.

In the light of the example in the patent in suit, the Board is satisfied that this technical problem has been solved.

5. In the Decision T 150/87 of 19 April 1988 it was held that the subject-matter of the main claim underlying the decision was novel (cf. paragraph 5). The present Claim 1 only differs from that main claim insofar as it includes the further requirement that at least 90% of the solid particles have diameters less than 10µm. Since, in the absence of any new citations, the finding in the Decision T 150/87 with respect to novelty is binding upon the present Board, Appellant 02's arguments regarding novelty in the light of the disclosure of document (5) cannot be entertained.

6. It still remains to be decided whether the claimed subject-matter involves an inventive step.

As previously mentioned document (5) discloses liquid detergent composition containing builders and bleach dispersed in substantially water-free non-ionic surfactants with the aid of dispersants, such as, for example, silica (cf. page 5, lines 18 to 25 and Examples 2 to 4). Since the document clearly teaches that a dispersant is absolutely essential if a liquid detergent of acceptable stability is to be obtained, it would be of no assistance to the skilled person seeking to solve the present technical problem.

6.1. Document (1) discloses a built liquid detergent composition containing a liquid non-ionic surfactant and a colloidal suspension of polyphosphate salts in said non- ionic surfactant (cf. column 2, lines 21 to 24). According to this document, it is essential in the process of preparing the composition that the dehydrating vehicle, in which the colloidal anhydrous builder salt has been precipitated, is distilled off in the presence of the colloidal anhydrous polyphosphate salt and the liquid non- ionic surfactant (cf. column 2, lines 43 to 52).

Moreover, it is also stated that a colloidal suspension is only formed after the water of dehydration of the hydrated polyphosphate salt is removed during the dehydrating step and as a result of dehydration the colloidal particles are participated in the dehydrating vehicle and that it is only after a colloidal suspension is formed that a stable suspension results (cf. column 3, lines 55 to 66).

This document further discloses that mechanically produced fine particles (25 to 30µm) of inorganic polyphosphate builder may be added to the mixture or to the non-ionic in an amount up to 50% of the total polyphosphate builders and will be prevented from settling by the fine colloidal dispersion of dehydrated polyphosphate (cf. column (4), lines 6 to 13).

Finally, this document discloses that the size of the colloidal polyphosphate is from about 0.015 to about 50µm, and that the usual particle size distribution is such that about 95% is below 10µm and about 50% is below 1µm (cf. column 3, line 74 to column 4, line 6).

In the Board's judgment, the skilled person would conclude from the disclosure of document (1) that substantial amounts of colloidal particles are a prerequisite for providing a stable dispersion of solids in non-aqueous non-ionic surfactants. This would be reinforced by the only methods disclosed for the preparation of these prior art compositions and the clear distinction drawn between suspensions containing particles of non-colloidal dimensions and those containing particles of this dimension (cf. column 3, lines 55 to 60).

6.2. If, as the Appellants contended, the present composition contains substantial quantities of colloidal particles and, therefore, the only differences between them and those disclosed in document (1) lay in a small increase in the mean particle size and the addition of a solid bleach, the Board would agree that the claimed subject-matter would not involve an inventive step. However, the Board finds, in agreement with the Decision T 150/87, that a true construction of the present Claim 1 excludes the presence of substantial amounts of colloidal particles. Thus, in the Board's judgment, a realistic particle size distribution curve for a sample of solid particles in which at least 90% of the particles have diameters less than 10µm and the mean particle diameter of the sample is 2.5µm would exclude any possibility of substantial amounts of particles of colloidal dimension being present. The Board considers that a realistic size distribution curve would exclude distribution curves with two so-called peaks as would be obtained, for example, by mixing particles with different mean diameters. It is highly doubtful that a skilled person would express the result from such a distribution curve in terms of a single mean particle diameter.

7. In view of the above the Board finds that the proposed solution to the technical problem of providing stable liquid detergents without the aid of dispersants is inventive. Therefore, the subject-matter of Claim 1 involves an inventive step. Claims 2 to 8, which relate to preferred embodiments of the compositions according to Claim 1, are also allowable.