T 0233/90 (Recording medium) 08-07-1992

Reasons for the Decision

1. The appeal is admissible.

2. There are no formal objections under Article 123(2) and (3) EPC to Claim 1 of the main request since it is supported by the original disclosure and manifestly does not extend the protection conferred. Thus, Claim 1 is based on Claim 1 as originally filed and on the original description, page 17, lines 12 to 15 and 19 to 21; page 18, lines 12/13; page 19, last paragraph.

3. Document (1), which was filed before the priority date of the disputed patent, belongs to the state of the art according to Article 54(3) EPC for all the Contracting States designated in the patent. The question to be investigated is whether the magnetic recording medium as defined in Claim 1 of the main request is new with respect to the disclosure of this document.

3.1. Document (1) describes a magnetic recording medium, for example a magnetic tape, which comprises, on a support, a magnetic layer containing ferromagnetic powder. The latter comprises ferromagnetic iron oxide particles which possess a surface layer with cobalt adsorbed thereon (cf. page 8, line 23 up to page 9, line 1; page 9, lines 16 to 18 and page 19, Example 6, Claims 8 and 10). The particle size, the acicular ratio and the coercive force of the particles used in Example 6 fall within the ranges defined in Claim 1 of the patent-in-suit. This was not disputed by the parties. Therefore, novelty of the magnetic recording medium only depends upon whether or not the teaching of document (1) explicitly or implicitly contains the feature that "the magnetic layer is formed on the support with the application of a magnetic field."

3.2. Document (1) does not expressly mention that a magnetic field is applied directly after the coating operation in order to orient the particles. It is indicated at page 11 that a magnetic recording medium is prepared "in a usual manner". For example the particles are mixed with a binding resin, an organic solvent and conventional additives to prepare a paint composition, the paint is applied to a base by conventional means and then the product is dried (cf. page 11, lines 14 to 24). In the examples of (1), which all relate to the manufacture of magnetic tapes, there is no mention of an orientation step by means of a magnetic field directly after the coating step. However, in the Respondent's opinion this feature is implicit to a skilled person in view of the reference to a "usual manner" of preparing a magnetic recording medium in (1) since, in the case of magnetic tapes, the usual process involves passing the coated support through a magnetic field in order to orient or align the particles.

3.3. When assessing novelty, it is not permissible to "combine" separate items of prior art together. Only the actual content of a prior document as it would have been understood by a skilled person on its effective date can destroy novelty. In the case of a prior document according to Article 54(3), the effective date is the date of filing or the priority date of the said document. However, in a case such as the present, where the document according to Article 54(3) refers to "a usual manner" of preparing a product, it is permissible to use documents of reference such as handbooks, encyclopaedia or dictionaries in order to determine what the skilled person would have understood by such a reference on the effective date of the prior document. Concerning document (1), it is questionable whether the priority date can be allocated to the combination of Example 6 with the general statement on page 11, lines 14 to 18 referring to a usual manner of preparing a magnetic recording medium. Under these circumstances the filing date of document (1) is taken into consideration for the part of (1) relating to this combination of features. Thus, it is the usual manner(s) of manufacturing magnetic tapes on this date, i.e. on 29 September 1982, which should be taken into account when reading (1).

The Appellant has admitted that orientation of the particles by a magnetic field before the drying step was usual in the case of magnetic tapes. Indeed documents (3), (Z4) and (Z6) which are handbooks or encyclopaedia illustrating the common general knowledge and which were published in 1978, 1980 and 1981 respectively, show that from 1978 to 1981 the process of manufacturing magnetic tapes actually included the step of guiding the coated support through an orientation magnetic field immediately after coating, while the binder was still wet, whereby the particles were aligned (cf. (Z6) page 196, second paragraph, (Z4) page 328, lines 15 to 18 and Figure 13; (3) page 364, Figure 2, paragraph 3.2, the two last lines and page 365, right-hand column, lines 8 to 13). Under these circumstances, the Board has no reason to doubt that it was a customary practice on the filing date of document (1) to orient the particles by means of a magnetic field when preparing magnetic tapes.

The Appellant has alleged that there existed other methods for orienting the particles during the preparation of magnetic tapes and has referred to documents (Z1) and (X2). It is true that according to (Z1) some orientation of the particles occurs due to the longitudinal shearing effects during the coating process (cf. page 218, lines 12 to 14). Document (X2) also mentions a slight orientation of the particles in the lengthwise direction due presumably to a physical orientation of physically anisotropic particles during the coating operation (cf. column 4, lines 58 to 63). However it also derives from these documents that this orientation is very small (according to (X2) the orientation ratio Br /Br is much lower than 1.3) and that the desired substantial increase in orientation was already achieved by means of a magnetic field at the date of publication of (X2) and (Z1), i.e. 1955 and 1964. Even if it were assumed to the Appellant's benefit that both the orientation by shearing forces and the orientation by application of a magnetic field were usual at that time, i.e. 18 and 27 years respectively before the filing date of document (1), this would not be relevant in the present case since these two documents do not illustrate what was the usual manner of manufacturing magnetic tapes on the filing date of (1).

Under the circumstances set out above and in the absence of evidence showing the contrary, the Board can only conclude that on the filing date of (1) only one usual manner of manufacturing magnetic tapes was available to the skilled person, i.e. a method including an orientation of the particles in a magnetic field. It follows that the skilled person reading the reference to a "usual manner" of manufacturing a magnetic recording medium in (1) would automatically have carried out an orientation of the particles in a magnetic field in the case of the manufacture of magnetic tapes according to the examples. Thus, he would inevitably have arrived at the claimed product. The Board is convinced that the person skilled in the art would not have departed from this customary practice of preparing magnetic tapes in the absence of instructions clearly specifying that orientation of the particles should be avoided or that a random particle distribution on the support is desired. Therefore, the Board comes to the conclusion that the feature "the magnetic layer is formed on the support with the application of a magnetic field" is implicitly disclosed in document (1).

The outcome of this decision would be the same if the relevant part of document (1) were entitled to the priority date of 1 October 1981 since the preceding reasoning would apply mutatis mutandis.

3.4. As regards the table submitted by Respondent I (cf. point IV above), the Board observes that it is neither clear where the values of the squareness ratio (Br/Bs) and orientation ratio (Br /Br ) come from nor to what kind of particles they relate. Furthermore, as pointed out by Respondent I himself, the values of the squareness ratio depend not only upon whether or not the particles were oriented by a magnetic field during the preparation of the tape but also upon other factors in particular the dispersibility of the particles and the intensity of the applied field. Under these circumstances none of the contradictory arguments presented by the parties on the basis of the comparison of this table with the squareness ratios indicated in (1) can be followed by the Board.

3.5. Contrary to the Opposition Division's view, the Board considers that the statement at page 4 of (1) that the magnetic tape has excellent orientation properties is ambiguous. It might mean that the geometrical orientation of the particles on the support is excellent, that the orientation ratio of the magnetic tape is very high or that the particle magnetization, i.e. the rotation of the magnetization vectors (switching) is excellent during magnetic recording. However, having regard to the reasons given above, this question may remain open since the outcome of the decision does not depend upon the interpretation of this sentence.

3.6. Contrary to the Appellant's submissions, the Board's findings are in agreement with the decisions T 194/84 and T 103/86 referred to in the Statement of Grounds of appeal since they are based on the assessment of whether or not the feature in question is directly and unambiguously derivable from document (1) taking into account matter which is implicit to a person skilled in the art in what has been expressly mentioned.

4. It results from the preceding, that document (1) discloses the magnetic recording medium as defined in Claim 1 of the main request. Therefore the subject-matter of the said claim does not meet the requirement of novelty as set out in Articles 52(1) and 54(3).

5. In view of the non-patentability of Claim 1, the main request cannot be allowed. The dependent claims thus fall with this claim.

6. In connection with the auxiliary requests A to D, the Board notes that the main claims of these requests all recite additional features which are clearly not anticipated by the disclosure of document (1). Therefore, the grounds for revocation given in the appealed decision cannot be maintained for these auxiliary requests and this decision must be set aside. However the question arises whether the amendment in Claim 1 of request A (and the same amendment in the main claim of request C) is in conformity with the provisions of Article 123(2). Furthermore, the Respondents have contended that the subject-matter of the amended claims according to the requests A and B did not involve an inventive step. As these points have not been examined during the opposition proceedings, the Board considered appropriate to remit the case to the Opposition Division for further prosecution on the basis of the auxiliary requests.