T 0818/20 14-03-2023

Reasons for the Decision

1. Main request - Insufficiency of disclosure (Article 83 EPC)

1.1 The patent does not disclose the invention as defined in claim 1 in a manner sufficiently clear and concise for it to be carried out by a person skilled in the art (Article 83 EPC).

1.2 Under the established case law of the Boards of Appeal, the requirements of sufficiency of disclosure are met if a person skilled in the art can carry out the invention as defined in the independent claims over the whole scope of the claims without undue burden using their common general knowledge (see the Case Law of the Boards of Appeal, tenth edition 2022, II.C.5.4)

This requirement is not met in the present case.

1.3 In this respect the following questions concerning the interpretation of claim 1 which were discussed during the oral proceedings are relevant in the context of the assessment of Article 83 EPC:

- Does the expression "gap" in feature 1.12 require interpretation, in particular in the sense that "gap" actually means "groove"?

- How is feature 1.10 to be interpreted, according to which "the gap is at least partially filled by a filler"?

1.4 As to the term "gap", the wording of feature 1.12 in the overall context of claim 1 does not contain any unclarity or ambiguity. Rather, it clearly states that dimensions are selected such that the thermal expansion of the magnetic cores plus the thermal expansion of the filler is identical to the thermal expansion of the gap in the base body.

There is nothing in claim 1 that would lead the skilled person to believe that, contrary to its literal wording, feature 1.12 refers to the thermal expansion of the groove in the base body instead of the gap. Even if this definition might seem to make more sense from a technical point of view, there is no indication in claim 1 that something else was meant than the clear wording of the claim would suggest in view of features 1.8, 1.10 and 1.12. This was also not argued by either of the parties.

In particular, feature 1.8 of claim 1 introduces a "gap defined by the width of the groove (201) and the width of the magnetic core". This is entirely in line with the patent specification in paragraph [0019], which states that a gap is generated between a side wall of the groove and a side wall of the magnetic cores, if the width of the groove is larger than the width of the magnetic cores.

Therefore, considering the claim as a whole and in its technical context, it can be said that there is neither a contradiction nor an ambiguity arising from the use of the term "gap" in feature 1.12. It can therefore also be said that the gap in feature 1.12 clearly refers to the gap as defined in features 1.8 and 1.10 and consequently does not refer to the groove as such, but to a portion of the groove, which is defined by the width of the groove and the width of the magnetic core.

In view of the clear and unambiguous wording of claim 1, there is no need to consult the description in the case on file (for an outline of the case law in this respect, see T 0169/20, reasons 1.2 to 1.4). However, for the sake of argument, the board wishes to mention that even taking into account the description, no other conclusion could be reached. The patent appears to be ambiguous in paragraph [0019] with respect to the use of the term "gap" in connection with the groove and the filler. However, this alone does not lead to the conclusion that the term "gap" in claim 1 is misused or actually has a different meaning. To the contrary, since the term "gap" has a clear meaning in the context of claim 1, this feature cannot be given a different meaning in the light of the description. Moreover, the description does not allow such a conclusion to be drawn in an unambiguous manner. The board notes that the respondent has not argued this either.

1.5 As to whether feature 1.10 is to be interpreted exclusively in the sense that the gap is filled with the filler over its entire width, the board notes that while feature 1.10 may be broad, there is no apparent reason why it should be interpreted in such a restricted sense so as to exclude specific embodiments falling within the scope of that feature. The description should not be used to implement restrictive features not suggested by the wording of the claims (see Case Law of the Boards of Appeal, 10th Edition, II.A.6.3.4).

The mere fact that an effect of the invention mentioned in the description is not or only insufficiently solved by some embodiments may be relevant for the question of inventive step. In the present case, however, it is irrelevant for the question of claim interpretation, at least as far as technically reasonable interpretations of the claim wording are concerned. In fact, the board does not consider the wording of feature 1.10 to be unclear, so that an interpretation in light of the description was neither required nor appropriate.

1.6 Therefore, in accordance with the submissions of the appellant during the oral proceedings, the board understands feature 1.10 to include, in particular, the following technically reasonable arrangements of the filler in the gap:

(a) The filler extends over the entire width of the gap, but only partially in the direction of the gap height;

(b) the filler extends over the entire width and the entire height of the gap;

(c) the filler extends only partially across the width of the gap and either partially or fully across the height of the gap.

1.7 Feature 1.12 requires the thermal expansion of the magnetic cores plus the thermal expansion of the filler to be identical to the thermal expansion of the gap in the base body, which can be expressed mathematically as follows:

DeltaWgap = DeltaWcore + DeltaWfiller

Since in options (a) and (b) the gap is completely filled by the filler (in the width direction), a necessary condition for feature 1.12 in these cases is that the width of the gap is at any time equal to the width of the filler. The appellant is therefore correct that DeltaWgap = DeltaWfiller must be satisfied in the case of (a) and (b).

However, this condition can only be satisfied if the thermal expansion of the magnetic cores is zero (DeltaWcore = 0). Only in this case can the condition of feature 1.12 be satisfied, as the thermal expansion of the filler is identical to the thermal expansion of the gap. There is no other way to solve the equation of feature 1.12 above for these cases.

1.8 The definition DeltaWgap = DeltaWgroove - DeltaWcore cannot be derived from feature 1.8 of claim 1, contrary to what was assumed by the opposition division. In feature 1.8 it is only stated that the gap is defined by the width of the groove and the width of the magnetic core. It does not say that the gap width is equal to the width of the groove minus the width of the magnetic core. Rather, as stated above, the skilled person will readily understand from the general technical context of the claimed subject-matter that the gap is formed when the width of the groove is greater than the width of the magnetic core. In this case, a gap is formed between a side wall of the groove and a side wall of the magnetic core. This understanding is consistent with the description in paragraph [0019] of the patent. Therefore, for options (a) and (b) it is correct to assume that DeltaWgap = DeltaWfiller.

1.9 The board therefore agrees with the appellant that options (a) and (b) require a thermal expansion of the magnetic cores to equal zero. A magnetic core which is of ferrite material having a thermal expansion of zero, however, does not exist.

1.10 The board does not dispute that there may be a few materials with a very low or even a zero thermal expansion, at least within a very narrow temperature range. However, claim 1 relates to a magnetic core made of a ferrite material (feature 1.6). The respondent has not provided any evidence that there are magnetic cores made of ferrite which have zero thermal expansion and the board is convinced that, as argued by the appellant, no such material exists.

For the sake of completeness, it should be noted that, in the decision under appeal, the opposition division also stated that, if a zero thermal expansion of the magnetic core were required in order to solve the equation resulting from feature 1.12, this would prevent the person skilled in the art from implementing the invention if such a material did not exist (see point 17.5.3.1 of the reasons for the decision under appeal).

1.11 It should also be noted that an embodiment of the invention in which the filler extends across the entire width of the gap is not an isolated individual implementation, but rather constitutes the main embodiment of the invention. This understanding is consistent with the description, see in particular paragraphs [0019], [0030] and [0031], in connection with figures 6 and 7.

1.12 The board concludes that claim 1 may comprise practicable solutions to the equation according to feature 1.12 in the case of option (c) where the filler does not extend across the full width of the gap. However, for the main options (a) and (b), i.e. in the case where the filler extends across the entire width of the gap, the equation could only be solved if the thermal expansion of the magnetic core made of ferrite was zero, which is not possible. Options (a) and (b), which fall within the scope of claim 1, are therefore not practicable. Consequently, the invention as defined in claim 1 cannot be carried out in the whole range claimed.

1.13 For these reasons, the board concluded that claim 1 of the main request does not meet the requirements of Article 83 EPC.

2. Auxiliary request 1 - Insufficiency of disclosure (Article 83 EPC)

2.1 Claim 1 of auxiliary request 1 was amended to overcome an objection under Article 123(2) EPC by replacing "base" in feature 1.9 with "base body".

Since this amendment has no effect on the question whether the invention as defined in claim 1 can be implemented by the person skilled in the art, as was acknowledged by the respondent in the oral proceedings, the reasons given by the board in respect of the main request above also apply to auxiliary request 1.

2.2 For these reasons the board concluded that also claim 1 of auxiliary request 1 does not meet the requirements of Article 83 EPC.

3. Result

As neither the main request nor auxiliary request 1 fulfils the requirements of Article 83 EPC, the board had to accede to the appellant's main request.