T 1831/18 (Polymeric compositions comprising therapeutic agents in crystalline phases / BIOTRONIK) 16-04-2020

Reasons for the Decision

Admissibility of the appeal by the appellant-opponent

1. According to the appellant-patent proprietor, the appeal by the appellant-opponent is inadmissible, because the appellant-opponent, in its statement setting out the grounds of appeal, did not request that the decision be set aside nor indicated the reasons for doing so. The appellant-opponent has provided no counter-arguments to the opposition division's reasoning, i.e. there is no causal relationship between the findings in the decision under appeal and the reasoning in the appellant-opponent's statement of grounds of appeal.

1.1 However, the appellant-opponent with its statement of grounds of appeal dated 13 September 2018 requested that the patent be revoked in its entirety. Since the contested decision maintained the patent on the basis of the 1**(st) auxiliary request, this implies the request that the decision under appeal be set aside.

1.2 Furthermore, for the purpose of assessing admissibility of the appeal pursuant to Article 108, third sentence, EPC and Rule 99(2) EPC, the appeal can only be assessed as a whole. There is no support in the EPC for a notion of "partial admissibility" of an appeal.

Here, at least in respect of inventive step, the statement of grounds of appeal of the appellant-opponent is sufficiently reasoned, for the following reasons. The impugned decision found the subject-matter of auxiliary request 1 to involve an inventive step because D4 provided no hint about the relevance of particle size to drug release, and briefly mentioned that the same reasoning applied to a combination of D4 with D13 without further details. The reasoning in the appellant-opponent's statement of grounds of appeal in respect of the combination of D4 and D13 is, in comparison, sufficient to allow the board to understand why the decision is alleged to be incorrect and on what facts the appellant-opponent bases its arguments, without first having to make investigations of its own.

1.3 Since the requirements of Article 108, third sentence, EPC are fulfilled for at least one ground of appeal, the appeal of the appellant-opponent is admissible.

Main request (patent as granted)

2. Inventive step

2.1 In agreement with both parties, the Board considers D4 to represent the closest prior art.

D4 discloses a medical device for insertion into a mammalian body, i.e. an implantable medical device, wherein a crystalline therapeutic agent is applied on at least a portion of its surface (see claim 1 of D4). Rapamycin is recited among the suitable therapeutic agents on page 4, line 16 of D4. The crystals of the active compound can be incorporated within a polymeric layer which at least partially coats the medicinal device (see page 5, lines 24-27).

Although D4 discloses the presence of crystalline therapeutic agent on the device (e.g. figure 1), it is not directly and unambiguously derivable from D4 that it is in amounts beyond 90%.

2.2 The subject-matter of claim 1 of the main request thus differs from the implantable medical device of D4 in that more than 90% of the therapeutic agent (rapamycin, rapamycin ester, everolimus, zotarolimus, biolimus, tacrolimus or pimecrolimus) that is present in the composition is in its crystalline form.

2.3 According to the appellant-patent proprietor, the technical effect resulting from this higher crystalline form content is that the stability of the therapeutic agent is improved. The Board notes that the patent contains no evidence of this effect beyond the statements cited by the appellant-patent proprietor (i.e paragraphs [0017]-[0019]). Nonetheless, the Board accepts this effect for the reasons set out below.

2.4 The objective technical problem is the provision of a medical device coated with a drug-containing polymeric composition wherein the stability of the therapeutic agent is improved.

2.5 As mentioned in T 777/08, OJ 2011, 633 (point 5.2 of the reasons), "amorphous forms are generally known to be more soluble and have greater bioavailability than their crystalline counterparts. However, several disadvantages can also generally be expected for the amorphous form, namely, with respect to chemical and physical instability". The skilled person, faced with the above problem, would know from common general knowledge that a crystalline form solves the technical problem defined above. The skilled person is further prompted to consider higher amounts of crystalline material by D4, where the feature that "the therapeutic agent is in a crystalline form" is described as a solution to the problem of achieving long release times. Contrary to the appellant-patent proprietor's position, no incentive to retain part of the therapeutic agent in amorphous state can be discerned in D4.

2.6 Accordingly, the subject-matter of claim 1 of the main request does not involve an inventive step.

Auxiliary request 1

3. Inventive step

3.1 In comparison with the implantable medical device of the closest prior art D4, the subject-matter of claim 1 of auxiliary request 1 differs in that:

- more than 90% of the therapeutic agent (rapamycin, rapamycin ester, everolimus, zotarolimus, biolimus, tacrolimus or pimecrolimus) that is present in the composition is in its crystalline form, and

- the crystalline particles of the therapeutic agent have an average particle size ranging from 100 nm to 200 nm.

3.2 The appellant-patent proprietor contends that these features lead to improvements in stability and bioavailability.

With respect to the higher content in crystalline form and its effect on stability, reference is made to the consideration given above (see 2.).

As to the average particle size, the patent contains no evidence of any effect on bioavailability beyond the mere statements in the passages of the description cited by the appellant-patent proprietor (see paragraphs [0006] and [0034] of the patent). Furthermore, in these paragraphs, the effect on bioavailability is not related to the claimed particle sizes of 100-200nm but to the "small-size drug particles that can be formed by using nanothechnology", and is only stated to arise for poorly soluble drugs. Consequently, the claimed average particle size of 100-200 nm is not credibly shown to have any effect on bioavailability. This effect cannot be taken into account for the formulation of the technical problem.

3.3 Thus, the objective technical problem remains the provision of a medical device coated with a drug-containing polymeric composition wherein the stability of the therapeutic agent is improved.

3.4 The only mention in D4 of any particle sizes of the therapeutic agent is the length of the crystals formed during the process of example 1, said length being much greater than the upper limit of present claim 1 (see pages 8 and 9). However, the general disclosure of D4 is not limited to any particle sizes, and is also not limited in terms of the process for forming these crystals (see the statement on page 5, lines 28-29). The selected range of 100-200nm is not shown to be associated with any unexpected technical effect. The skilled person, knowing from D13 (see page 8, lines 22-35) the influence of particle size and surface area on dissolution rate, especially for poorly soluble drugs, would select the claimed range in the course of routine optimisation without the exercise of inventive skills. Contrary to the appellant-patent proprietor's view, the general teaching of D13 is not limited to crystalline forms.

3.5 Accordingly, the subject-matter of claim 1 of auxiliary request 1 does involve an inventive step.

Auxiliary request 2

4. Inventive step

Claim 1 of auxiliary request 2 comprises the further feature according to which the at least one biocompatible polymer forms a substantially continuous polymeric matrix with the at least one therapeutic agent encapsulated therein.

The appellant-opponent considers that this feature is already disclosed in the closest prior art D4 (see page 6, line 11). The Board concurs. Accordingly, the amendments corresponding to auxiliary request 2 do not modify the above conclusions of lack of inventive step.

Auxiliary request 3

5. Article 123(2) EPC

Claim 1 of auxiliary request 3 comprises the further feature according to which the at least one biocompatible polymer forms polymeric particles with the at least one therapeutic agent encapsulated therein.

5.1 The Board share the appellant-opponent's view that the application as filed does not disclose the combination of the feature pertaining to a coated implantable medical device and the feature pertaining to the encapsulation of the therapeutic agent in particles of biocompatible polymer.

The application as filed generally pertained to drug-containing polymeric compositions suitable for forming implantable medical devices and nano/micro-particulate formulations. Compositions of biocompatible polymeric particles appear to be considered only in the context of formulations for injection (see page 7, lines 12-27), and not in the context of a coating on an implantable medical device. Contrary to the appellant-patent proprietor's view, the passages on pages 12-17 do not disclose an implantable medical device coated with particles of the biocompatible polymer encapsulating the therapeutic agent, but only the encapsulation of the crystalline therapeutic agent in a protective coating layer before mixing with the polymeric solution. Accordingly, the subject-matter of claim 1 cannot be derived directly and unambiguously from the content of the original application. Thus the requirements of Article 123(2) EPC are not met.

Auxiliary requests 4-7

6. Auxiliary requests 4-7 are respectively identical to the main request and auxiliary requests 1-3 with the exception of the following amendment (shown by the Board):

"more than 90% of the therapeutic agent in said composition is crystalline [deleted: rapamycin, rapamycin ester, everolimus, zotarolimus, biolimus, tacrolimus or pimecrolimus that is present][deleted: in the composition is ][deleted: in its][deleted: crystalline ][deleted: form]."

6.1 This amendment extends the protection conferred by the patent, because amended claim 1 no longer requires that more than 90% of the rapamycin, rapamycin ester, everolimus, zotarolimus, biolimus, tacrolimus or pimecrolimus present in the composition be crystalline.

In claim 1, the therapeutic agent includes, but is not limited to rapamycin, rapamycin ester, everolimus, zotarolimus, biolimus, tacrolimus or pimecrolimus. In claim 1 as amended, the requirement that more than 90% of the therapeutic agent is crystalline is not limited to the specific agents recited in the first part of the claim. Consequently, a crystalline content in the therapeutic agent of more than 90% does not necessarily entails that the rapamycin, rapamycin ester, everolimus, zotarolimus, biolimus, tacrolimus or pimecrolimus contained therein is crystalline for more that 90%. As a result, none of the auxiliary requests 4-7 comply with the requirements of Article 123(3) EPC.

6.2 Additionally this amendment does not modify the conclusions reached above in respect of the higher-ranking requests. No additional differentiating features over the closest prior art D4 are introduced in auxiliary requests 4-6, with the consequence that these requests do not meet the requirements of Article 56 EPC. Auxiliary request 7 still contains the combination of features found to infringe Article 123(2) EPC above (see 5. above).

7. It follows from the above that none of the requests of the appellant-patent proprietor can be allowed. Accordingly, the decision under appeal has to be set set aside and patent has to be revoked. The Board could take this decision in writing since the appellant-patent proprietor who is adversely affected by this decision announced not to attend oral proceedings scheduled for 19 March 2020. The statement not to attend oral proceedings is treated as equivalent to a withdrawal of the request for oral proceedings (see Case Law of the Boards of Appeal of the European Patent Office, 9th edition 2019, III.C.4.3.2 and the decisions sited there).