T 0942/18 01-07-2020

Reasons for the Decision

1. The case is ready for decision which is taken in written proceedings without holding oral proceedings in accordance with Article 12(8) RPBA 2020. The parties' rights under Articles 113 and 116 EPC are observed.

The principle of the right to be heard pursuant to Article 113(1) EPC is observed since that provision only affords the opportunity to be heard and the parties' submissions are fully taken into account.

1.1 The appellant's request for oral proceedings pursuant to Article 116(1) EPC is auxiliary to their main request (1) that the decision under appeal be set aside and that the case be remitted to the opposition division.

1.2 The respondent's request for oral proceedings is auxiliary to their main request that the appeal be dismissed and to their auxiliary request that the Board when remitting the case to the opposition division does not take any decision on the compliance with the requirements of Article 83 EPC of any of the sets of claims relied upon or filed by the appellant.

1.3 Thus, since the case is remitted to the opposition division for further prosecution in accordance with the appellant's main request (see point 1.1 above) and because this decision does not deal with the issue of compliance with the requirements of Article 83 EPC on the merits, as requested by the respondent (see point 1.2 above), both parties' auxiliary requests for oral proceedings remain inactive.

2. The impugned decision

2.1 The relevant passages of the decision under appeal related to the issue of sufficiency of the claims of the patent as granted, corresponding to the then main request, read as follows:

"The subject-matter of the patent in suit is directed to an outer blade for an electric shaver having hair raising bars with a very specific cross-sectional geometry, in particular the shape of the connection between the skin contact surface (45a) and the inner side surface (45c).

The description provides detailed description of embodiments for any combination disclosed in the claims, i.e. the skin contact surface (45a) being connected to the inner inclined surface (45c) by a single line or a plurality of line segments or by a line and an arc or by a plurality of lines and arcs or by a plurality of arcs wherein the line segments have certain angles with the respective connecting surfaces (45a and 45c) and/or the arcs have different centers and/or curvatures. The patent in suit as a whole is however silent about how any of the claimed cross-sectional geometries of the hair raising bar could be achieved either experimentally or by mass production.

Bearing in mind the special cross-sectional geometry of the hair raising bar and the actual size thereof (mym) none of the common metal processing procedure at the date of the priority, like stamping, grinding, punching, die casting, coining or etching appears suitable for achieving the geometry with the specific parameters as set forth in the claims.

The Opposition Division is therefore of the opinion that the patent in suit is not disclosed sufficiently clear and complete for a skilled person to carry out at least one of the embodiments covered by the claims."

The negative decision on the then auxiliary requests was based on the above assessment related to the then main request and was formulated as follows:

"The auxiliary requests 1 to 4 filed with letter of 03.02.2017 do not address the issue relating to Article 83 EPC and thus none of these auxiliary requests overcomes the insufficiency of disclosure of the patent as a whole.

The auxiliary requests 5 to 7 were submitted during the oral proceedings, in response to the decision of the Opposition Division with respect to Article 83 EPC.

The ground of opposition relating to the insufficiency of disclosure (Art. 83 EPC) was present on file as from the Notice of Opposition and thus requests 5 to 7 filed during the oral hearing and addressing Article 83 EPC are considered as late filed and thus not allowed into the proceedings (Art. 114(2) EPC).

Furthermore, it is to be noted that the insufficiency of disclosure issue concerns the patent/application as a whole and not the disclosure of the claims alone. Thus, amending the set of claims cannot be considered as an appropriate measure for overcoming an issue relating to the insufficiency of disclosure."

2.2 The conclusion of the opposition division, that the claimed invention was not sufficiently disclosed, was based on the hypothesis that no known manufacturing technique was suitable for achieving the features specified in the claims (see point II above).

Said unsuitability was justified by a further hypothesis, namely that the claimed features had very small dimensions (in the range of some µm, see again point II above).

3. Lack of reasoning - Rule 111(2) EPC

3.1 The Board fully concurs with the view of the appellant that the impugned decision was not reasoned within the meaning of Rule 111(2) EPC.

This is because no explanation was given in relation to the following crucial points:

(i) why the cross-sectional geometry of the claimed hair raising bars necessarily had very small dimensions (in the range of some µm), in spite of the fact that no dimensions were given in the claims,

(ii) why the manufacturing techniques identified in the appealed decision as "conventional" were unsuitable for achieving the allegedly microscopical features specified in the claims.

3.2 According to the established jurisprudence (see the Case Law of the Boards of Appeal, 9th edition 2019, III.K.3.4.3 and III.K.3.4.4) a decision should consider the essential facts, evidence and arguments in detail and contain the logical chain of reasoning which led to the conclusion drawn.

Even if "reasoning" does not mean that any argument submitted by any party should be dealt with in detail, as a rule, the reasons for a decision are inadequate if a reader had to reconstruct or even speculate as to why a negative decision was taken.

This is presently the case, because the "logical chain of reasoning" of the appealed decision is based on two hypothetical considerations which had to be motivated by the opposition division, because are not self-evident, and were not.

3.2.1 The respondent argues in its letter dated 10 June 2020 that the statement that the claimed features had very small dimensions (in the range of some µm) was self-evident to a skilled person, in spite of the fact that no dimensions were given therein, and did not therefore need any further explanation in the appealed decision.

This was because larger geometrical features would necessarily have resulted in a thicker outer blade, which would then have prevented the shaver from fulfilling its function of cutting the hair close to the skin.

The opposition division also did not need to give detailed reasons explaining why the geometrical features have very small dimensions, because it was not contested by the appellant that these were the typical dimensions in this technical field.

3.2.2 The Board disagrees, because the rejected claims are not formulated in a manner as to be restricted to such microscopical embodiments, and also because there is no evidence on file supporting the allegation that increasing the dimensions of the claimed geometrical features would have prevented the claimed electric shaver from providing an acceptable shaving performance (see the statement setting out the grounds of appeal, point 2.2.3 d).

3.3 Furthermore, the opposition division's conclusion that no manufacturing technique at all was available at the priority date for achieving the features specified in the claims being a "negative" claim, can also not be taken for self-evident, because the indication of concrete examples of unsuitable techniques cannot demonstrate that no suitable techniques exist at all.

3.4 As the appealed decision does not contain any motivation on the above identified crucial points, and these points were disputed between the parties (see the minutes of oral proceedings) the reasons thereof are not in line with the general principle of good faith and fair proceedings, and therefore deficient.

3.5 The respondent puts forward that the impugned decision was reasoned because it contained the following statement:

"The patent in suit as a whole is however silent about how any of the claimed cross-sectional geometries could be achieved either experimentally or by mass production." (see point 2.1 above).

In such a situation, it was upon the patentee-appellant to show that the common general knowledge of the skilled person was sufficient to put the invention into practice.

According to the ratio decidendi of T 63/06 (supra), so the respondent, the burden of proof on sufficiency was on the appellant, who failed to offer any evidence of the existence of a suitable process that was both common general knowledge and capable of making the claimed outer blade.

3.6 This position of the respondent cannot be shared by the Board for the following reasons.

The ratio decidendi of T 63/06 (supra, Reasons point 3.3) provides guidance for examining whether an opponent arguing lack of sufficiency has discharged its burden of proof.

According to this decision there could be circumstances in which a weak presumption exists that the invention is sufficiently disclosed. In such a case, the opponent can discharge his burden by plausibly arguing that common general knowledge would not enable the skilled person to put this feature into practice. It is then up to the patent proprietor to prove the contrary, i.e. that the skilled person's common general knowledge would enable him to carry out the invention.

T 63/06 does not therefore lift or relax in any way the requirement, set out in Rule 111(2) EPC, that decisions of the departments of the EPO should be reasoned.

As already discussed, the opposition division failed to provide any discussion to support the two hypotheses on which the impugned decision was based (see point 1 above).

The statement, identified by the respondent, according to which the impugned patent alone does not explain how the claimed cross-sectional geometries could be achieved, does not explain why these features have dimensions in the range of some µm or why no known manufacturing technique was suitable for achieving them.

4. The reasoning of the appealed decision is additionally considered deficient because the appellant's argument that there were further manufacturing techniques (e.g. laser cutting, sintering and deburring) with wich manufacturing of the claimed geometrical shapes would have been possible, was discussed during oral proceedings, as reflected in the minutes thereof (see page 2, second paragraph), but was not dealt with in the reasons.

5. Procedural violation - Main request of the respondent

Having reviewed the impugned decision the Board finds that the appellant has convincingly demonstrated that the appealed decision on the issue of sufficiency of disclosure is not reasoned in accordance with Rule 111(2) EPC.

This amounts to a substantial procedural violation because a fundamental procedural right of the appellant has been violated.

Because of this substantial procedural violation the appealed decision has to be set aside, and the main request of the respondent, namely that the appeal be dismissed, cannot be allowed.

6. Reimbursement of the appeal fee

As a further consequence of the above assessed substantial procedural violation, the Board also decides that the reimbursement of the appeal fee, as requested by the appellant, is equitable, according to Rule 103(1)(a) EPC.

7. Remittal

Rule 111(2) EPC gives parties to EPO proceedings a fundamental procedural right to be provided with the reasons for a decision.

Lack of compliance therewith is considered by the Board as a fundamental deficiency occurred during opposition proceedings within the meaning of Article 11, second sentence, RPBA 2020.

Such a fundamental deficiency is considered by the Board as "special reason" within the meaning of Article 11 RPBA 2020, which justifies a remittal to the opposition division for further prosecution, in accordance with Article 111(1) EPC.

The Board whishes to clarify that such a fundamental deficiency is not a minor defect, limited to the formulation of the reasons appealed decision, which was taken on a sound procedural basis and correct in substance, as argued by the respondent.

Furthermore, the fundamental deficiency in the decision under appeal as discussed in points 3 and 4 above also prevented the Board from any meaningful review of the opposition division's findings on the merits of the case as to whether or not the requirements of Article 83 EPC are met by any of the appellant's requests.

8. Further requests of the respondent

8.1 By way of supplementary requests (see page 4 of the respondent's letter dated 10 June 2020 and point VI above), the respondent requested specific terms of the order of the present decision.

8.2 These requests cannot be allowed for the following reasons:

8.2.1 In accordance with Article 111(2), first sentence, EPC the opposition division to which the case is remitted shall be bound by the ratio decidendi of the present decision in so far as the facts are the same.

8.2.2 For the reasons given in point 6 above, it is for procedural reasons that the case is to be remitted to the opposition division for further prosecution in accordance with Article 11 RPBA 2020. The present decision only establishes that a fundamental procedural right of the appellant has been violated because the decision settling the first instance proceedings was not reasoned. Since the case is to be remitted to the department of first instance without consideration of the substantive issues, the ratio decidendi of the present decision neither concerns the substantive aspects of sufficiency of disclosure, nor any issue of patentability. Therefore, the present decision does not have any binding effect so far as substantive issues are concerned.

8.2.3 Hence, the opposition division cannot be ordered to limit the prosecution on substantive issues or to follow specific procedural steps.

8.2.4 Further, since the decision of the opposition division is to be set aside, the opposition division will not be bound by it.

8.2.5 The Board also does not see how, by remitting the case to the opposition division, which will then have to take a reasoned decision on the requests of both parties, the appellant may be given an unfair procedural advantage over the respondent.

8.3 The respondent's supplementary requests are therefore refused.