T 0174/12 05-11-2013

Reasons for the Decision

1. The appeal is admissible.

2. Admissibility of the grounds of opposition under Article 100(a) in combination with Article 54 EPC and Article 100(c) EPC

In the decision under appeal the opposition division admitted into the proceedings the new grounds for opposition based on extension of subject-matter (Article 100(c) EPC) and lack of novelty under Articles 100(a) and 54 EPC (see decision under appeal, points 1 and 4 of the Reasons). Hence, they are no fresh grounds introduced at the appeal stage, which can be introduced into the appeal proceedings only with the consent of the patent proprietor. On the contrary, since the decision of the opposition division addresses the objections based on these grounds (see points 3 and 5 of the Reasons), they are subject to the review of the Board of appeal when this decision is appealed. Accordingly, there is no reason to disregard these grounds of opposition.

3. Article 100(c) EPC

Claim 1 of the main request comprises the wording according to which the connection formations constitute anchorage formations "to ensure anchorage of the prosthesis at the implantation site".

This wording was not present in claim 1 as originally filed, which merely referred to "anchorage formations" without specifying what is to be anchored and where. In other words the original claim 1, while disclosing that these formations perform an anchorage function, does not specify the nature of this function.

However, according to paragraph [0052] the annular parts, as well as the respective anchorage elements, substantially form the basic structure or armature of the prosthesis, designed to ensure positioning and anchorage in situ of the prosthesis itself. Accordingly, this passage discloses that the nature of the anchorage function is to ensure anchorage of the prosthesis at the implantation site, irrespective of whether this function is performed by the anchorage formations alone or in combination with other parts of the armature. Therefore, claim 1 and paragraph [0052] of the application as originally filed clearly disclose anchorage formations to ensure anchorage of the prosthesis at the implantation site.

Moreover, since these passages do not mention that the anchorage formations act on the outside of the sinuses of Valsalva the fact that this feature is not present in claim 1 as granted does not introduce subject-matter which extends beyond the content of the application as originally filed.

Therefore, the objection under Article 100(c) EPC is not convincing.

4. Admissibility of a new argument based on O5

The appellant submitted for the first time during the oral proceedings that it was clear to the person skilled in the art that the profile of the V-shaped part of the enlarged element shown in Figure 2 of document O5 was exactly the same as the profile of a human cardiac valve. On the basis of this argument it questioned the novelty or at least the inventive step of the claimed prosthesis, arguing that O5 disclosed or at least rendered obvious the fixing of the valve leaflets at this part, which thus acted as a supporting formation.

It is true that this submission is neither a new fact nor new evidence, since both O5 and the attacks of lack of novelty and lack of inventive step based on this document were already present in the proceedings. However, these former attacks were completely different from the latter since they did not identify the supporting formation in this V-shaped part but in other elements. Therefore, the submission of this argument constitutes an amendment to the appellant's case after the filing of the grounds of appeal.

Admission and consideration of such amendments is subject to the Board's discretion. In particular, amendments sought to be made after oral proceedings have been arranged should not be admitted if they raise issues which the Board or the other party or parties cannot reasonably be expected to deal with without adjournment of the oral proceedings (see Article 13(1) and (3) of Rules of Procedure of the Boards of Appeal).

Nonetheless, in the present case the Board considered that the nature of this amendment was not such as to require an adjournment of the oral proceedings. As a matter of fact the respondent itself, albeit objecting to the introduction of this new line of argument, did not request an interruption, let alone an adjournment, of the oral proceedings in order to consider it.

Under these circumstances the Board decided to admit into the proceedings and consider this new line of argument.

5. Novelty

Novelty has been put into question in view of each of O5 and O2.

According to established case law, it is a prerequisite for the acceptance of lack of novelty that the claimed subject-matter is "directly and unambiguously derivable from the prior art". In other words, it has to be beyond doubt - not merely probable - that the claimed subject-matter is disclosed in a prior art document (see Case law of the Boards of Appeal of the European Patent Office, 7th edition 2013, I.C.3.1).

5.1 O5 discloses a prosthesis which comprises: an armature (100) for anchorage of the valve prosthesis at an implantation site, said armature defining a lumen for passage of the blood flow; and a set of prosthetic valve leaflets ("Herzklappenersatz"), which are supported by said armature and are able to move, under the action of the blood flow, in a radially divaricated condition to enable the flow of the blood through said lumen in a first direction, and in a radially contracted condition, in which said valve leaflets co­operate with one another and block the flow of the blood through the prosthesis in the direction opposite to said first direction. The armature comprises: two annular parts (indicated by references 30 and 17 in the reproduction of Figure 2 of O5 on page 16 of the appellant's letter of 29 February 2012) connected by connection formations ("Verankerungselemente" shown as expansions for the bulbi arteriae 13 and 14 in Figure 2), which extend as connection of said annular parts, with the capacity of projecting radially with respect to the prosthesis. The annular parts have a structure which can expand from a radially contracted condition of advance towards the site of implantation of the prosthesis to a radially expanded condition, in which the prosthesis is withheld in the implantation site (see claim 1). The connection formations are preferably adapted to the inner form of the bulbi (see paragraphs [0009] and [0034]). Hence, they have a pattern arched towards the outside of the prosthesis and constitute anchorage formations to ensure anchorage of the prosthesis at the implantation site (see paragraph [0010]).

However, neither the claims nor the description of document O5 disclose supporting formations for the valve leaflets, which formations are carried by at least one of the annular parts so as to leave substantially disengaged said lumen for passage of the blood. On the contrary, the parts of the description referring to the arrangement of the leaflets disclose that they are fixed by stitches to the ring element 17, i.e. directly to one of the annular parts (see paragraphs [0034] and [0035]).

It is true that the prosthesis depicted in Figure 2 exhibits a V-shaped part whose profile may resemble that of the leaflets of a human cardiac valve. However, this drawing, which does not show the valve leaflets of the prosthesis, is merely schematic (see paragraph [0034]). Hence, it is not an exact representation of the geometry of the prosthesis and of its exact placement in the human body. This is corroborated by Figure 1, also schematic, which represents a section of the aorta, and shows a vessel which corresponds to the human anatomy only in a very approximate manner. Therefore, it cannot be clearly and unambiguously derived from O5 that the geometry of the V-shaped part shown in Figure 2 corresponds to that of natural valve leaflets. As a consequence, it is not implicit that the V-shaped part is to be used as a support element for the valve leaflets.

Therefore, the subject-matter of claim 1 is novel over O5.

5.2 As to O2, this document relates to a venous valve prosthesis (see paragraphs [0003] to [0006]).

By contrast, present claim 1 is directed to a cardiac valve prosthesis. This feature defines the prosthesis' capability of operating under the hydrodynamic conditions to be encountered in the heart. Since these conditions are not the same as those encountered in the veins, the prosthesis disclosed in O2 cannot be considered as a cardiac valve prosthesis.

Accordingly, the prosthesis of O2, in particular its embodiment depicted in Figure 4, does not exhibit all the features of claim 1 of the patent in suit.

Therefore, the subject-matter of claim 1 is also novel in view of O2.

6. Inventive step

6.1 It is common ground that O5, which like the patent in suit relates to a cardiac-valve prosthesis (see for instance the abstract), represents the most relevant prior art for assessing inventive step.

6.2 The object underlying the claimed product starting from this prior art is to provide a structure of prosthetic valve leaflets that can reproduce as faithfully as possible the operation of natural valve leaflets, this as regards minimization of the loss of head induced on the blood flow and as regards the possibility of preventing lines of flow of the blood through the prosthesis from being set up that might depart, as regards their pattern, from the pattern of the lines of flow characteristic of natural blood flow (see paragraph [0015]).

This object is achieved by a prosthesis in accordance with claim 1, which exhibits supporting formations for the set of leaflets, said formations being carried by at least one of the annular parts so as to leave substantially disengaged the lumen for passage of the blood.

6.3 In the appellant's opinion O5 itself, when considered in the light of the common general knowledge of human anatomy of the person skilled in the art, renders it obvious to fix the valve leaflets to the V-shaped part depicted in Figure 2.

However, that V-shaped part belongs to an element which, according to the teaching of O5, is intended to anchor the prosthesis in place and not to support the valve leaflets (see paragraphs [0008], [0009] and [0034]). The description of O5 does not provide any hint that this part may perform the latter function. Nor does Figure 2 prompt the person skilled in the art in this direction since, as explained above, Figure 2 is merely schematic and cannot be assumed to correspond exactly to the arrangement of the prosthesis as implanted.

Therefore, O5 in combination with the common general knowledge of the person skilled in the art does not render it obvious to achieve the object above in accordance with claim 1. Accordingly, its subject-matter involves an inventive step.