T 1023/00 (Stable plasma/JOUANNEAU) 17-09-2003

Reasons for the Decision

1. The appeal complies with Articles 106 to 108 and Rule 64 EPC and is therefore admissible.

2. Article 83 EPC:

2.1. The examining division objected to that the application in suit failed to disclose any experimental evidence showing that the postulated stable plasma in the lattice of a solid was obtainable at all, and that the disclosure appeared to lack a description of a specific embodiment which would enable the skilled person to create and verify such a stable plasma. In particular, the applicant seemed to base the existence of a plasma solely on theoretical calculations relating to the V vs. log(I) curves shown in Figures 5a and 5b, and not on any experimental evidence relating to the plasma itself (cf. item VIII(b) above).

The appellant referred to the detailed description giving ample examples of metals which would be suitable for formation of a stable plasma, and the different manners how particles can be made to enter the metals and form a stable plasma within the metals (cf. IX(b) above).

2.2. As already mentioned in the communication accompanying the summons for oral proceedings, the Board agrees with the examining division that the alleged formation of a plasma inside the palladium electrode is based on the conjecture that such a plasma is formed when the coefficient b is equal to zero in the Tafel equation

V = a - b log(I)

(in the following referred to as 'the "b=0" state'). This condition is shown to take place when a palladium electrode is placed in an electrolyte having pH of about 0.40 or less (cf. application, page 6, lines 33 to 35; page 10, lines 1 to 34; Figure 5a). The embodiments of Figures 8 and 9, on the other hand, use techniques of immersing a palladium electrode in hydrogen plasma or hydrogen gas, for which the application does not offer any theory predicting the formation of a plasma inside the electrode.

2.3. It is acknowledged in the application in suit that the "b = 0" state for a palladium electrode in an electrolyte was also disclosed in documents D1 and D2 (cf. application in suit, page 9, line 22 to page 10, line 6; D1, Section "Grenzwert der Diffusionsüberspannung" on pages 403 to 404; D2, page 486 "Results", Figures 2a and 2b, page 488, right hand column, last paragraph to page 489). In contrast to the theory of plasma formation developed in the application in suit, both the documents D1 and D2 attribute this phenomenon to the formation of a super-saturated state of hydrogen in palladium, i.e. an explanation which does not entail the formation of a plasma inside the palladium electrode (cf. D1, page 404, right hand column; D2, page 48, right hand column to page 489).

2.4. The alleged formation of a plasma inside a palladium electrode remains a highly controversial topic in the scientific community, as exemplified by the documents D3 and D4, which both are published in Nature, a peer-reviewed scientific journal. Both the documents D3 and D4 present negative results on the search for nuclear fusion in palladium, a phenomenon which presupposes the existence of a hydrogen (deuterium) plasma inside palladium.

2.5. Thus, in the present case, the theory of plasma formation inside a palladium electrode forming the basis of the claimed invention is not only in contradiction with the theories presented in documents D1 and D2 for explaining the same phenomenon, but is also in contradiction with the findings in numerous other scientific publications, such as documents D3 and D4, which all report the failure to observe any indication that a high-density hydrogen (deuterium) plasma could be formed inside a palladium electrode.

2.6. In the decision T 541/96 it was held that if an invention seems, at least at first, to offend against the generally accepted laws of physics and established theories, the disclosure should be detailed enough to provide to a skilled person conversant with mainstream science and technology that the invention is indeed feasible (cf. reasons, items 6.1 and 6.2).

2.7. Thus, under the present circumstances where the present invention is in apparent contradiction with established theories, it is not sufficient for meeting the requirements of Article 83 EPC merely to present a theory which shows the possibility of forming a plasma inside a solid without providing experimental evidence that (i) such a plasma is actually produced; and (ii) the plasma can be produced using the means disclosed in the application in suit.

2.8. Furthermore, the Board also notes that the application in suit fails to provide any experimental evidence that the plasma allegedly produced in the solid could be put successfully into the different uses envisaged in the application in suit, such as rocket propellant, source of very high current, nuclear fusion, or transmutation of elements. As mentioned above, a large number of scientific articles, such as documents D3 and D4, show that until to date, nuclear fusion in the manner envisaged in the application in suit has not been observed despite considerable effort spent on these endeavours. The same applies to the alleged transmutation of elements inside palladium.

Therefore, the onus is also here on the appellant to show that the different uses disclosed in the application in suit are not merely speculative but feasible. The appellant has however failed to provide any evidence supporting the alleged feasibility.

2.9. Therefore, in the Board's judgement, the application in suit does not meet the requirements of Article 83 EPC.

3. Article 84 EPC:

3.1. In the decision under appeal, the examining division held that the independent claims fail to define the essential features of the invention in clear terms, since they indicate the result to be achieved instead of defining the structural features and/or actions which are essential for obtaining the result (cf. item VIII(a) above).

The appellant argued that the independent claims 1 and 2. according to the main request are drafted in functional terms while still providing a clear definition of the invention over the prior art (cf. item IX(a) above).

3.1.1. The Board agrees with the appellant that it is permissible to define technical features in a claim in functional terms, i.e. in terms of a technical result to be achieved, if such features provide sufficient clear instructions to reduce them to practice (see, e.g. T 68/85, OJ EPO 1987, 228; T 418/89, OJ EPO 1993, 20; T 107/00 unpublished). In the present case, in the method of claim 1 according to the main request the lattice is of such nature that "it will allow the creation of stable plasma inside" and a process step is provided for "causing said particles to become a stable plasma inside" the lattice. In the apparatus according to claim 2 according to the main request, also the lattice is defined as in claim 1 and the apparatus includes means for "causing said particles to become a stable plasma".

3.1.2. As mentioned above when discussing the requirements of Article 83 EPC, the concept of a "stable plasma" inside a solid does not have a well-recognized meaning; in fact it is highly questionable whether such a plasma exists at all, taking into account that the appellant's theory predicting the formation of a "stable plasma" inside a solid is in disagreement with other scientific findings as exemplified by documents D1 to D4 (cf. in particular items 2.2 and 2.3 above). Furthermore, the application in suit does not provide any teaching as regards the detection of the "stable plasma", nor is such a technique common general knowledge in the art. Consequently, it is not possible to establish whether or not a given process or apparatus has created a "stable plasma" in a solid.

3.1.3. Therefore, any functional feature directed to the creation of a "stable plasma", such as the above-mentioned features in claims 1 and 2 according to the main request, cannot be clear, since it not only refers to the creation of a state of matter whose very existence is in doubt, but also there does not exist any established technique for detecting the state of matter to be created. Consequently such functional features must fail to meet the above-stated criterion established in the case law of the boards of appeal of providing sufficient clear instructions to reduce them to practice (cf. item 3.1.1 above).

Thus, independent claims 1 and 2 according to the main request are not clear, contrary to the requirements of Article 84 EPC.

3.2. Independent claims 1 and 9 according to the auxiliary request specify the conditions for attaining the "b = 0" state, referred to under item 2.2 above, for an electrode in an electrolyte as means for causing particles to enter the lattice and become a stable plasma inside the lattice. The "b = 0" state is, according to application in suit, an indication of the creation of a stable plasma inside the electrode.

As discussed above, the appellant's theory explaining the "b = 0" state in terms of the formation of a stable plasma inside the electrode is in contradiction with other scientific works, as exemplified by documents D1 to D4 (cf. item 2.5 above). Therefore, it is not clear that a "stable plasma" inside a solid is indeed created, even if one has succeeded in obtaining the "b = 0" state, and since there is no known technique for detecting the alleged "stable plasma", there is no known way to establish whether the "stable plasma" was successfully formed or not.

The independent claims 1 and 9 according to the auxiliary request are therefore not clear, contrary to the requirements of Article 84 EPC.

3.3. The terms "using said plasma" and "means to use said plasma" in claims 1 and 2 according to the main request and in claims 1 and 9 according to the auxiliary request are so vague that they do not have any limiting effect at all on the scope of the claims. The claims are therefore not clear, contrary to the requirements of Article 84 EPC.

3.4. Therefore, in the Board's judgement, claims 1 and 2 according to the main request and claims 1 and 9 according to the auxiliary request do not meet the requirements of Article 84 EPC.

4. The Board also draws attention to the fact that if the applicant were successful in showing that a plasma could indeed be produced inside the palladium electrode when the overvoltage V is independent of the current in Figure 5a (the "b=0" state), then such a plasma must also have been produced in the experiments disclosed in documents D1 and D2, since the experimental conditions disclosed in the application in suit are the same as those disclosed in documents D1 and D2 (cf. D1, Section "Grenzwert der Diffusionsüberspannung" on pages 403 to 404; D2, page 486 "Results", Figures 2a and 2b, page 488, right hand column, last paragraph to page 489). In such a case, the subject matter of claim 1 according to both requests would not be new within the meaning of Article 54(1) and (2) EPC having regard to any of documents D1 and D2.