4.13 Physical values, units 

When the properties of a material are referred to, the relevant units need to be specified if quantitative considerations are involved. If this is done by reference to a published standard (e.g. a standard of sieve sizes) and such standard is referred to by a set of initials or similar abbreviation, it needs to be adequately identified in the description.

Physical values must be expressed in the units recognised in international practice, which is generally in the metric system, using SI units and the other units referred to in Chapter I of the Annex to EEC Directive 80/181/EEC of 20 December 1979, as amended by EEC Directives 85/1/EEC of 18 December 1984, 89/617/EEC of 27 November 1989, 1999/103/EC of 24 January 2000, 2009/3/EC of 11 March 2009 and Commission Directive (EU) 2019/1258 of 23 July 2019 (see F‑II, Annex 2). Any values not meeting this requirement must also be expressed in the units recognised in international practice. Values expressed in the system of imperial units (e.g. inches/pounds) or in units having local character (e.g. pint), in general, do not meet the criterion "recognised in international practice".

As determined by the President under Rule 49(2), for mathematical formulae the symbols in general use must be employed. For chemical formulae, the symbols, atomic weights and molecular formulae in general use must be employed.

In general, use should be made of the technical terms, signs and symbols generally accepted in the field in question.