T 0022/98 (Cutter assembling means/AKV-ORTIC) 01-10-2001

Reasons for the Decision

1. The appeal is admissible.

2. Admissibility of the opposition of the Appellant (Rule 55(c) EPC)

2.1. One prerequisite for an opposition to be admissible is that at least for one ground of opposition there is an indication of the facts, evidence and arguments presented in support of that ground (Rule 55(c) EPC). The Respondent argued that the opposition of the Appellant, which was based solely on an alleged prior use, did not fulfil this requirement and therefore the opposition should be considered inadmissible.

2.2. According to the established case law of the Boards of Appeal in case of prior public use the requirements of Rule 55(c) EPC will only be satisfied if there is sufficient indication of the relevant facts, evidence and arguments so that the Opposition Division (and the patent proprietor) are able to properly understand the reasoning and the merits of the Opponent's case in relation to the grounds of opposition (see T 222/85, OJ 1988, 128). The Opposition Division should be able to determine the following details of the prior use:

what was made available to the public when and under which circumstances (see e.g. T 328/87, OJ 1992, 701 and T 522/94, OJ 1998, 421).

2.3. The Respondent argued that there were inconsistencies between the two photographs (D7) as well as between the photographs (D7), the drawings (D5) and the declaration ("Eidesstattliche Versicherung" - D8). It was not clear whether the photographs concerned one and the same machine and whether the machine in the photographs was actually the one represented in the drawings because the latter were apparently drafted on 13 and 15 May 1987, i.e. after the alleged delivery as supported by D4. The photographs, drawings and the declaration further did not conclusively disclose the re-assembling means being axially movable in respect of the slitting machine.

2.3. What the Respondent in fact argues is that the facts and evidence indicated and submitted by the Appellant do not provide indubitable proof that the features of the prior use machine actually correspond to the features of claim 1.

However, according to the established case law of the Boards of Appeal the sufficiency of the indication of facts and evidence in the notice of opposition for the purpose of admissibility must be distinguished from the strength of the opponent's case, i.e. whether the facts and evidence submitted actually prove what is alleged (see T 222/85, supra).

The EPC does not require an opposition to be conclusive so as to be admissible (see T 234/86, OJ 1989, 79). This is derivable from Rule 55(c) EPC in conjunction with Rule 56(1) EPC, the former only referring to the necessity to provide an "indication of the facts, evidence and arguments" in support of a ground of opposition.

2.4. The Opposition Division considered in its decision that the oppositions (thus including the opposition of the present Appellant) were sufficiently substantiated.

The Board concurs with the Opposition Division's judgment that the Appelant's notice of opposition and its annexes sufficiently specify what was the object of the sale and delivery to the firm Wieland-Werke AG and when and under which circumstances this sale and delivery took place so as to fulfil the requirements of Rule 55(c) EPC.

The opposition of the Appellant is therefore admissible.

3. Novelty (Article 54 EPC)

Novelty was not an issue between the parties in the appeal proceedings. As none of the documents available in the file, nor the prior use on its own, discloses all features of claim 1, the Board is satisfied that the subject-matter of claim 1 is novel.

4. Inventive step (Article 56 EPC)

4.1. The Board agrees with the Appellant that the prior use, if proven, would be the most appropriate state of the art from which to start the discussion on inventive step.

4.2. When comparing the subject-matter of claim 1 with the arrangement of the alleged prior use the Board notes at least the following differences:

- the store from which the re-assembling means will be equipped with cutters and spacers is supported by a computer, programmed with a cutting plan,

- hydraulic piston means are provided, which work from outside the movable frame portion for actuating means inside the arbors for clamping and releasing the sets on the arbors and simultaneously and firmly journalling the adjacent arbor ends to said frame portion.

4.3. The features mentioned above assure that the slitting machine can easily be adapted to different slitting operations and that it operates with a high precision.

The object of the invention of the patent in suit is therefore to provide the appropriate cutting arrangement to the slitting machine more easily and more efficiently, to perform this function with as little manpower as possible and to assure the accuracy of cutting (see the patent in suit, column 1, line 47 - column 2, lines 9).

4.4. The Appellant argued that the provision of a computer to support the store from which the cutters and spacers were to be provided, according to a cutting plan, would be normal technical practice for the skilled person at the priority date of the patent in suit. Everywhere in industry such kind of automation of internal processes was carried out, so as to make more efficient use of materials and other resources. D3 was an example of such automation.

In general the Board can agree with the Appellant that it is the permanent task of the skilled person to consider which processes in his field of technology are susceptible to (further) automation. For the skilled person in the field of cutting sheet metal the performing of store management in connection with the expected cutting operations is one of those processes. This distinguishing feature, on its own, therefore would not be sufficient to guarantee an inventive step.

4.5. The Respondent argued that one should not consider the distinguishing features of claim 1 separately, but that they should be seen in their context with the other ones. In this respect the computer had a function within the slitting machine as a whole and helped in equipping the arbors in an automated fashion.

The Board wishes to remark here that claim 1 does not mention the function of the computer in relation to an automated equipping of the arbors with cutters and spacers; it merely indicates that the store management is performed with the aid of a computer with a cutting plan. The actual withdrawal of cutters and spacers from the store, the mounting thereof on the arbors in the re-assembling means, the movement of the re-assembling means to the slitting machine, etc. can, according to the present wording of the claim, still be performed by hand, i.e. without automation by the computer. The step of automation of store management as mentioned in claim 1 is therefore not linked to other steps in the performance of the slitting machine.

4.6. The Appellant argued that the provision of hydraulic piston means working from outside the movable frame portion for actuating means inside the arbors for clamping and releasing the sets of cutters and spacers on the arbor, etc. did not involve an inventive step. The skilled person would derive in an obvious way from the neighbouring field of lathes, in the present case illustrated by either D1 or D2, that such means could be provided.

4.7. As claim 1 specifies that sets of cutters and spacers are mounted on each arbor and are pushed onto the arbor as a set, it is evident that the clamping and releasing of the cutters has to have a component of movement in the axial direction of the arbors. Further, the hydraulic means performing this function together with the means inside the arbors, participate in firmly journalling the arbor ends to the movable frame portion simultaneously with the clamping action.

The teachings of D1 and D2 focus on the radial clamping of items on shafts. The shaft ends remain free. Thus these documents cannot provide the skilled person with a teaching of axially clamping and releasing cutters and spacers on arbors and at the same time providing a firm journalling of the arbor ends by the same hydraulic means working from outside the frame portion in which these ends are journalled, nor render such a teaching obvious.

4.8. The Respondent further argued that the simultaneous journalling of the arbor ends to the movable frame portion did not solve a technical problem and therefore this feature need not be considered for inventive step.

In a slitting machine as the one of claim 1, wherein the arbor ends have to be freed of the frame to be able to mount cutters and spacers thereon, the proper journalling of these arbor ends during operation is definitely a technical problem. If in addition the hydraulic means should be capable of firmly journalling the arbor ends to the movable frame portion, this can only mean that the clamping action on the cutters and spacers is performed by a movement which is directed axially outwards. This provides a technical solution to the problem discussed above.

4.9. The Board therefore considers that the distinguishing feature of the hydraulic means clamping and releasing the cutters and spacers as well as firmly journalling the arbor ends to the movable frame portion establishes inventive step of the subject-matter of claim 1 over the slitting machine of the alleged prior use (Article 56 EPC).

4.10. Whether the prior use actually took place in the form as alleged is therefore a matter which needs no further investigation.

In view of the above considerations the argument of the Respondent, that the slitting machine of claim 1 further differed from the machine in the prior use through the re-assembling means being axially movable in respect of the slitting machine, needs no further discussion.

4.11. As the Respondent only requested oral proceedings in the event the appeal would not be dismissed, no oral proceedings were necessary.